DELLNER BUBENZER

CMB-3 For SB Brakes

CMB-3 For SB Brakes

Compact status monitoring system for a brake system with display and fieldbus interface.

  • One CMB-3 box can handle up to 2 brakes SB16, SB23.3, SB28.3, SB28.5, SB30
  • High ambient temperature range -20°C … +70°C
  • Protection class IP65
  • Internal keypad for parameter change
  • Brake operation cycle counter (up to 100 million Cycles)
  • Automatic power supply range switch 110-240 V AC
  • Profibus or Profinet bus system possible.
  • All scaled measures signals and error bits are transferred by bus system to the main control PLC.
  • Cable for sensors have a plug M12 on each end
  • Same type of box for SF and SB brake types for easy troubleshooting
  • Stainless steel electronic box IP65 for outdoor use
  • Sunshine protection cover for outdoor use

Additional PRODUCTS

Gas-hydraulic buffers are installed as impact energy absorber on crane gantries, trolleys, elevators, stackers, reclaimers and other industrial equipment.

Protective element to be connected parallel to the output of the rectifiers BGL, EGL and SGL to increase the interurruption capacity

Half Wave & Full Wave rectifiers for junction box mounting.

Din rail mounted unit switches from bridge rectification to half-wave rectification

WPT Low Inertia Brakes are suited for high cycle applications or general brake duties. These heavy duty brakes afford increased precision for your processes with minimal part movement during start and stop, acceleration time is decreased leading to more cycles per minute.

WPT Low Inertia Clutches and Brakes are suited for high cycle applications or general clutch/brake duties.

WPT Low Inertia High Torque Clutches are suited for high cycle applications or general clutch duties.

This flywheel PTO is designed for inline and sideload applications on all internal combustion engines with standard SAE industrial flywheel or flywheel housing dimensions.

WPT Power has engineered the WPT Pilotless™ Mechanical Power Take-off to eliminates the pilot bearing and increases side load capacity over previous generations of PTO products.

WPT Planetary Hydraulic Hoists are ideal for applications in the oil & gas, utility, and crane industries. WPT’s hoist designs adhere to SAE J706 standards and provide lifting capacities of 8,000 lbf and 12,000 lbf, respectively.

WPT Planetary Hydraulic Winches provide fast line speed and consistent, powerful pull capacity.

WPT® Power Grip clutches are designed to accommodate in-line and shaft-to-shaft power transmission applications with large inertia loads.

The WPT® Power Grip PO Clutch is suitable for in-line and shaft-to-shaft power transmission applications.

The WPT® Type 2 Hydraulic Power Take-Off utilizes large spherical roller bearings designed for heavier duty sideload capacity.

WPT® water cooled brakes (WCBs) are high energy absorbing solutions used as dynamic tensioning and static holding brakes.

WPT Worm Gear Winches are offered from 9,000 lbf to 20,000 lbf, with options of hydraulic or electric operation.