DELLNER BUBENZER

KST

KST

TKMAX:  7950 Nm

These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type. The standard material of the elastic intermediate ring Polyurethane (Vulkollan) is suitable for a temperature range of -35˚C up to +80˚C. For a short time -40˚C up to +100˚C.

  • Steel coupling, torsionally elastic and bullet-proof (fail safe)
  • Torque transmission via elastic intermediate ring
  • Transmits rotating power from one shaft to another while accomodating misalignment between the two shafts
  • Elastic ring provides superb electrical insulating characteristics (e.g. prevents leaking currents)
  • Coupling hubs finish bored and keywayed acc. to DIN 6885
  • Coupling hubs unbored
  • Coupling hubs pilot bored
  • Coupling dynamically balanced according to ISO 21940 Grade: G 2.5; G 6.3

Additional PRODUCTS

With a single acting (SA) brake, braking force is generated in one half of the brake and the other half slides towards it using a robust, low friction system, enabling self-alignment and making it ideal for small spaces and applications with axial movement.

The SKP model disc brake is a spring applied, hydraulically released brake which offers a reliable and safe of method of braking linear or rotary motion.

With a single acting (SA) brake, braking force is generated in one half of the brake and the other half slides towards it using a robust, low friction system, enabling self-alignment and making it ideal for small spaces and applications with axial movement.

The STL Systems are "multi-function" units, all contained within one interface. It is indeed a modular system that you can choose the function(s) needed. All from single, S (Stopping) T (Turning) or L (Locking) functions.

The Twin Safe is our larger torque twin disc variation of our classic reliable SFB series, used successfully on winch motors in ship building and as a safety, service or holding brake in wharf crane installations.

A retrofitable, compact electronic status indication system to be integrated into the brake as an additional device.

Hydraulic active rotor brake

A hydraulic active rotor brake with a braking force of 44 kN that’s been specially developed for use in damp, dusty and corrosive working environments

Due to its high capacity, our SFRA brake is mainly used as a rotor brake in wind turbines. It is particularly suitable for applications with a high duty cycle.

Due to its high capacity, our SFRA brake is mainly used as a rotor brake in wind turbines. It is particularly suitable for applications with a high duty cycle.

JHS WTC is a flexible disc coupling mounted between gearbox and generator. It's a tailor-made solution for wind turbine applications (Type WTC = Wind Turbine Coupling).

Hydraulic active yaw brake caliper

Hydraulic active yaw brake caliper with GL Type Certification

Hydraulic active yaw brake caliper

A hydraulic active yaw brake with GL Type Certification and braking force of 620 kN.

A passive yaw sliding bearing with a robust yet simple design that guarantees optimum performance throughout the life of the turbine.

A passive yaw sliding bearing with  a robust yet simple design that guarantees optimum performance throughout the life of the turbine. 

Half Wave & Full Wave rectifiers for Din rail or panel mounted rectification.